best orthopedic doctor in vizag best orthopedic hospitals in vizag orthopedic surgeon in visakhapatnam
Dr. Sushant Kumar Mallik, M.B.B.S., M.S. (Orthopaedics), M.Ch. (Orthopaedics).
Revision Joint Replacement Fellow: Freemantle Hospital / Murdoch Hospital-AUSTRALIA.
F.J.A.R., Fellowship in Joint Replacement, University Hospital Chuv, Lausanne - Switzerland.
Trained in Computer assisted knee replacement surgery in Lyon - France.
Consultant Orthopaedic, Knee Joint and Hip Replacement Surgeon
SevenHills Hospital, Visakhapatnam.
Trauma Joint Replacement,Spine Arthroscopic Best Orthopedic surgeon bone Hospital Visakhapatnam Vizag Keyhole Surgery Ligament Re-construction Knee Hip Replacement Rheumatology Geriatric Old Age Sports Medicine Pain Management Knee Ankle Knee joint Replacement surgeons in Vizag keyhole surgery in Vizag Knee Hip Replacement Surgeons in Visakhapatnam orthopedic Doctors in Vizag orthopedic surgeon in Vizag Total Hip Replacement hospital in Vizag Ligament Re-construction Doctors in Vizag female orthopedic doctors in visakhapatnam bone best orthopedic doctors in vizag dr ratings pediatric orthopedic foot doctor visakhapatnam microfracture knee surgery knee specialist visakhapatnam knee replacement surgery cost orthopedic Best orthopedic doctors in visakhapatnam best Knee joint Replacement orthopedic doctor in vizag pediatric doctor visakhapatnam microfracture knee surgery Total Hip Replacement specialist in visakhapatnam Best Spine Orthopaedic Spine Arthroscopic Doctor Knee joint Replacement surgeons in Vizag, keyhole surgery in Vizag, Knee Hip Replacement Surgeons in Visakhapatnam, orthopedic Doctors in Vizag, orthopedic surgeon in Vizag, Total Hip Replacement hospital in Vizag, Ligament Re-construction Doctors in Vizag
Dr. Sushant Kumar Mallik use more and more computer-assisted navigation technology to perform knee replacement. Knee navigation helps ensure better alignment and results for total knee replacement.
One of the most critical aspects of knee replacement surgery is proper positioning of the joint replacement implants. Incorrectly aligned implants can lead to increased wear and loosening of the joint replacement.
In Computer-Assisted Surgery (CAS), a computerised model of the joint is used to ensure correct joint alignment, based on the bone anatomy and the intra-operative ligament situation. By tracking surgical instruments and components in relation to patient anatomy, Total knee navigation software is proven to improve long-leg alignment and functionality.
Proven clinical benefit
Several independent studies over the years have shown that using computer navigation for knee replacement surgery reduces the number of outliers and improves overall alignment, leading to better performance and longer life of the implants.
Superior soft tissue management for TKR
Today’s active patients are demanding a natural-feeling knee, so attention to soft tissue is increasingly important in total knee arthroplasty. Applications have multiple ways to assess and quantify the soft tissue envelope, including gap balancing and balance information through the entire range of motion.
- Written on April 04, 2016
It is always a pleasure to see you and come back to such a nice environment with friendly and caring people. We Know Dr. Sushant Kumar Mallik for a long time now and we feel very honoured to be their “patients” and “ friends
- Written on December 27, 2015
Thank you so much for the wonderful experience and helping me gain new self esteem through the proceedure. It was great how you held my hand when I was scared and stayed by my side. You are the best!
- Written on July 2, 2015
Thank you so much for everything! This procedure is something I have always wanted to do and I am so pleased that I have had it done with you!
From the first email that I have sent you to the last appointment, you have always been approachable and professional. I will always remember you,
thank you again. I am the happiest girl in the world !!
at University Hospital Chuv, Lausanne - Switzerland.
Please Click fir more Information on other News and Media
Listed below are some of the surgery procedures that Dr. Sushant Kumar Mallik specializes in. These are in-patient procedures which will require you to stay in the hospital for duration dependent on your type of procedure. Best rest assured that you will definitely receive highly personal and attentive care throughout your stay.
Arthroscopy (Keyhole Surgery)
Arthroscopy is a minimally invasive that is commonly used for knee, elbow, shoulder and ankle surgeries. Arthroscopy surgery makes small incisions which reduce recovery time, allowing patients to recover faster. The success rate is also higher due to lesser trauma to surrounding tissues.
Open reduction and internal fixation (ORIF) or Screw Fixation is used to realign and fix broken bones resulted from fractures. ORIF consists of 2 parts to the surgery; namely reduction and internal fixation.The broken bone is reduced or realigned and moved back into its original position. Then, screws, nails or plates will be placed to help the bone heal in the correct proper alignment.
Knee Replacement (Arthroplasty)
Knee replacement or knee arthroplasty is a procedure where the diseased parts of the joint are replaced by artificial ones called the prostheses. After prolonged wear and tear, knees can get worn out and that will cause pain and swelling. Knee arthroplasty helps to relieve pain and swelling and allow patients to enjoy activities that they previously were unable to.
Hip replacement is a procedure where the damage bone and cartilage is removed and man-made components take over its place. Many factors may lead to the breakdown of the hip joint. Common reasons are due to osteoarthritis, osteonecrosis, injury, fracture and even bone tumor. A metal stem and ceramic ball will be used to replace the damaged femoral head. Hip replacement allows patient to enjoy decrease in pain, improve their quality of life and increase their range of motion.
Microdiscectomy Spine Surgery
Microdiscectomy spine surgery is done to remove a small portion of bone pressing onto the nerve root to relieve neural impingement and allow space for the nerve to heal. Neural impingement causes patients to suffer from leg pain. Most patients are able to enjoy an immediate relief of leg pain when they wake up after surgery.
Soft tissue surgery (Laceration / Cut)
Laceration is a wound caused by the tearing of body tissues and is often irregular. As a result, the extent of the damage is often not obvious and there can be variable degrees of damaged caused to the underlying tissues and structures depending on the trauma.
Removal of Lump
Removal of lump or biopsy is done to remove tissues from a certain part of the body of the area of concern. The removed tissue will then be sent for diagnosis and examined. Biopsy can be done in a few ways and one of the most common would be scraping. The skin at the area of concern will be scraped and samples can be obtained.
Total hip replacement surgery aims to relieve hip pain and increase hip function by resurfacing the bones that meet at the hip joint. The surgeon removes the femoral head and replaces it with an artificial one. This prosthetic femur head is shaped like a ball, and fits perfectly into the rounded cup prosthesis that becomes the new socket of the pelvis.
Below is a detailed description of a typical total hip replacement surgery. The actual surgery usually takes about two hours.
Surgical procedures differ depending on the patient’s needs and the surgeon’s approach, but generally the steps are as follows:
After surgery, patients may spend several hours in a recovery room while the surgical anesthesia wears off. Afterwards, a patient typically is taken to a hospital room where he or she will spend 2 to 5 days recovering before being discharged.
A surgeon may give a patient a list of recommended post-surgical precautions. Hip precautions typically address one of two issues:
These precautions are recommended to minimize the chance of dislocation. For example, a patient may be told not to cross his or her legs.
These precautions maximize the chance that the natural bone has an opportunity to grow into the implants. For example, a patient may be told not to stand or walk without using crutches or a walker.
The surgeon makes an incision across the front of your knee to gain access to the patella, more commonly referred to as the kneecap. In a traditional knee replacement, the incision is usually about 8 to 10 inches long. In minimally invasive knee surgery, the incision is usually about 4 to 6 inches long. The jury is still out as to whether or not the pros of the smaller scar outweigh the cons of a smaller surgical area. Talk to your doctor about which procedure is right for you.
The first part of your knee that is exposed is your kneecap, called the patella. Once your knee is open, the surgeon rotates the patella outside the knee area. This allows the surgeon to view the area needed to perform the surgical procedure.
The first bone your surgeon will resurface is your femur, commonly known as the thighbone. Once the surgeon has opened up and exposed your knee joint, he or she will carefully measure your bones and make precise cuts using special instruments. The damaged bone and cartilage from the end of the femur is cut away. The end of your femur is cut and resurfaced to fit the first part of the artificial knee, the femoral component.
The surgeon attaches the metal femoral component to the end of your femur and uses bone cement to seal it into place.
The next bone your surgeon resurfaces is your tibia, or shinbone.The surgeon removes damaged bone and cartilage from the top of the tibia and then shapes the bone to fit the metal and plastic tibial components.
The bottom portion of the implant, called the tibial tray, is fitted to the tibia and secured into place using bone cement. Once the tray is in place, the surgeon will snap in a polyethylene (medical-grade plastic) insert to sit between the tibial tray and the femoral component, and act as a kind of buffer. This insert will provide support for your body as you bend and flex your knee.
Before returning the patella to its normal position, the surgeon might need to flatten the patella and fit it with an additional plastic component in order to ensure a proper fit with the rest of your implant. The plastic piece, if needed, is cemented to underlying bone.
Your surgeon will bend and flex the knee to ensure that the implant is working correctly, and that alignment, sizing, and positioning is suitable. To complete the procedure, the surgeon will close the incision with stitches or staples, and then bandage it and prep you for recovery. You may leave the operating room with your leg in a continuous passive motion (CPM) machine that will gently bend and flex your new knee for you while you are lying down.